MUY INTERESANTE: Feria Virtual
HIGH VACUUM
Extraction of the smoke before it reaches
welder’s breathing area
The Minibuster MB-190 is unique in that it features a “built- in” filter cleaning device. Replacing “throw-away” filters becomes a thing of the past.
The design simplifies the operation, cleaning and disposal of the collected waste.
Cleaning the filter is carried out easily by connecting the unit to a compressed air supply. Depending on the application, this usually occurs once the filter has absorbed approximately 400 grams of pollution. After a few seconds of cleaning with compressed air, the extraction rates return to their optimum levels.
Automatic Start/Stop: Provides optimum service- and lifetime, energy savings and minimum noise exposure.
Two suction levels: The MB-190 has a two-stage ON/OFF switch to give higher and lower suction levels.
• No filter costs
• Built-in filter cleaning device
• Automatic start/stop – the machine detects arc current and starts the motor while the welding arc is on. After a few moments the welder stops welding, the Minibuster stops the motor automatically.
• Delivered with 5 m hose Ø 45 and adapter to Ø 38 mm
• Two suction levels: soft and extra efficiency
MINIBUSTER MB-190A |
|
| Supply voltage | 50- 60 Hz/1- ph / V 230 (optional – V 120) |
| Supply current | 15 A – Max output / 8 A – Soft output |
| Power kW | 2 x 0,95 |
| Power cable | 5 m / mm2 2,5 |
| Start/Stop | delay seg. 11 |
| Start/Stop working range | A 50-1000 |
| Air flow with 5m hose | (max) m3/h 220 |
| Static pressure (max) | Pa -19 000 |
| Compressed air | bar 5 |
| Inlet pipe diameter | mm 50 |
| Filtration effiency | % >99,9 (ZH1/487-2) |
| Utilization category | BIA C |
| Filter area | m2 2,8 |
| Noise level | 1m dB (A) 74 |
| Weight incl. filter | kg 16,5 |
| LxWxH (with handle) | mm 380 x 340 x 400 |
